Recommend DIYdata on Facebook

Garden Picnic Table


Picnic Table

Material list.

Timber (cutting information) - ideally use redwood or similar hardwood, alternatively use good quality pine which has been tanalised (or treat with a good quality preservative after cutting/drilling and before assembly)

2 x 4

Top rails 32 inches (2 off) as per diagram
Brace - 25 inches (2 off) as per diagram
Mid Table support (1 off) - 30 inches

2 x 6

Table top and seat slats 6 ft (9 off)
Leg 39 inches (4 off) as per diagram
Seat rails 60 inches (2 off) as per diagram


6 mm Coach bolts (use good quality chrome or galvanised)
Washers to suit coach bolts
Screws (good quality galvanised)

End view of picnic table
Side view of picnic table
see cutting information